Просмотр кода страницы PayControl Inform. Installation guide

This is PayControl Inform Installation guide. Main article about PayControl Inform and it's API — [[PayControl Inform]].
=Installation=
== Install pre-requisits ==

# Add '''EPEL''' repository and install another necessary '''packages''' (git needed, only if server has ability to connect to git repository with pushgate sources):

<source lang="bash">sudo yum install epel-release
sudo yum install wget libffi-devel openssl-devel gcc git
</source>
<ol start="2">
<li>Install '''Erlang''' (for RabbitMQ)</li></ol>

<source lang="bash">wget https://packages.erlang-solutions.com/erlang-solutions-1.0-1.noarch.rpm
sudo rpm -Uvh erlang-solutions-1.0-1.noarch.rpm
sudo yum install erlang
</source>
<ol start="3">
<li>Install '''RabbitMQ''', enable and start it</li></ol>

<source lang="bash">curl -s https://packagecloud.io/install/repositories/rabbitmq/rabbitmq-server/script.rpm.sh | sudo bash
sudo yum install rabbitmq-server
sudo systemctl start rabbitmq-server
sudo systemctl enable rabbitmq-server
</source>
Set up user-login for RabbitMQ. Enable Managemet plugin (it wil accessible on HTTP:15672/TCP). Grant access through firewall from Administrator's workstation to management console.

<source lang="bash">rabbitmqctl add_user <USERNAME> <PASSWORD>
rabbitmqctl set_user_tags <USERNAME> administrator
rabbitmqctl set_permissions -p / <USERNAME> ".*" ".*" ".*"
rabbitmq-plugins enable rabbitmq_management
firewall-cmd --get-active-zones
firewall-cmd --permanent --zone=<ZONE RETURNED BY PREVIOUS COMMAND> --add-rich-rule='
  rule family="ipv4"
  source address="<SOURCE IP/MASK>"
  port protocol="tcp" port="15672" accept'
firewall-cmd --reload
</source>
<ol start="4">
<li>Install, start and enable '''Redis''' (apt-get install redis-server)</li></ol>

<source lang="bash">sudo yum install redis
sudo systemctl start redis
sudo systemctl enable redis
</source>
<ol start="5">
<li>Install '''PostgreSQL''' and set up user-login, create database, do not forget to allow remote tcp-connection for user</li></ol>

<source lang="bash">sudo yum install postgresql postgresql-server
sudo postgresql-setup initdb
sudo systemctl start postgresql
sudo systemctl enable postgresql
sudo vi /var/lib/pgsql/data/postgresql.conf
    listen_addresses = 'localhost' ## Uncomment this string in /var/lib/pgsql/data/postgresql.conf
sudo vi /var/lib/pgsql/data/pg_hba.conf
    host    all             all             127.0.0.1/32            md5 ## Change ident to md5 in /var/lib/pgsql/data/pg_hba.conf
    host    all             all             ::1/128                 md5 ## Change ident to md5 in /var/lib/pgsql/data/pg_hba.conf
sudo -u postgres psql
create database <DB_NAME>;
create user <DB_USER> password '<DB_USER_S_PASSWORD>';
grant all privileges on database <DB_NAME> to <DB_USER>;
\q
psql -h localhost -p 5432 -U <DB_USER> -d <DB_NAME> -W
</source>
Insert and execute SQL script:
<source lang="sql">
create table tasks (
	id serial,
	uuid uuid not null unique,
	device_token text,
	payload text,
	callback_url text,
	created_at timestamp without time zone not null default (now() at time zone 'utc'),
	updated_at timestamp without time zone not null default (now() at time zone 'utc')
);


create table task_statuses (
	id serial,
	uuid uuid references tasks (uuid) on delete cascade,
	status smallint not null default 0,
	dt timestamp without time zone not null default (now() at time zone 'utc')
);


create table housekeeping_stat (
	total bigint
);

insert into housekeeping_stat (total) values (0);

create index ON tasks(created_at);

create index ON task_statuses(uuid);
</source>

Periodically you must reindex DB:

<source lang="sql">REINDEX DATABASE <DB_NAME>;
</source>
Owner of new tables must be &lt;DB_USER&gt;. Else, while housekeeper starts, may occours the error: asyncpg.exceptions.InsufficientPrivilegeError: permission denied for relation tasks. In this case you must set ownership of all tables in <DB NAME> to &lt;DB_USER&gt;:

<source lang="sql">ALTER TABLE task_statuses OWNER TO <DB_USER>;
ALTER TABLE tasks OWNER TO <DB_USER>;
ALTER TABLE housekeeping_stat OWNER TO <DB_USER>;
</source>
<ol start="6">
<li>Install '''Phython 3.6'''.</li></ol>

For Centos 7 you must install pithon 3.6 from IUS repository (in packages's names added letter &quot;u&quot;):

<source lang="bash">sudo yum install https://centos7.iuscommunity.org/ius-release.rpm
sudo yum install python36u python36u-devel python36u-setuptools
</source>
Instal virtualenv:

<source lang="bash">sudo pip3 install virtualenv
</source>
== Create vitual environment once for all pushgate services (use python 3.6 only) ==

<source lang="bash">mkdir -p /var/app/
virtualenv -p python3.6 /var/app/.env
</source>
== Install services ==
<source lang="bash">cd /var/app
source .env/bin/activate
</source>
Next step is putting files into current directory. There are two ways:
* Extract archives recieved from [[SafeTech]].
* From Safe-Tech Repository (throught internal network only). Example: <source lang="bash">
git clone git@gitlab.paycontrol.org:pushgate/pushgate.git
git clone git@gitlab.paycontrol.org:pushgate/tasker.git
git clone git@gitlab.paycontrol.org:pushgate/push-secretary.git
git clone git@gitlab.paycontrol.org:pushgate/payloader.git
git clone git@gitlab.paycontrol.org:pushgate/apple-pusher.git
git clone git@gitlab.paycontrol.org:pushgate/google-pusher.git
git clone git@gitlab.paycontrol.org:pushgate/callbacker.git
git clone git@gitlab.paycontrol.org:pushgate/status-porter.git
git clone git@gitlab.paycontrol.org:pushgate/housekeeper.git
</source>
When PCInform files is on the place, proceed installation:
<source lang="bash">
pip install -e pushgate
pip install -e tasker
pip install -e push-secretary
pip install -e payloader
pip install -e apple-pusher
pip install -e google-pusher
pip install -e callbacker
pip install -e status-porter
pip install -e housekeeper
</source>
===Fix of version mismatches===
Because of using multiple libraries may occurs some version mismatches between of them. For example:

Errors may occurs, during google-pusher installation:<br />
<pre>yarl 1.2.4 has requirement multidict&gt;=4.0, but you'll have multidict 2.1.6 which is incompatible.
aiohttp 3.3.1 has requirement multidict&lt;5.0,&gt;=4.0, but you'll have multidict 2.1.6 which is incompatible.</pre>

Errors may occurs, during callbacker, status-porter and housekeeper installation:<br />
<pre>aioxmpp 0.9.1 has requirement multidict~=2.0, but you'll have multidict 4.3.1 which is incompatible.</pre>

In this case, you need to:

<source lang="bash">pip uninstall multidict
pip uninstall yarl
pip uninstall aiohttp
pip install multidict==2.1.6
pip install aiohttp==2.1.0
</source>

== Configure services ==

<source lang="bash">cd /var/app
git clone git@gitlab.paycontrol.org:pushgate/configuration.git
vim configuration/pushgate.conf
cp -R configuration/services/* /etc/systemd/system
</source>
Config DB connection in /var/app/configuration/pushgate.conf

<source lang="bash">DB_DSN=postgres://<DB_USER>:<DB_USER_S_PASSWORD>@127.0.0.1/<DB_NAME>
</source>
== Start services ==

<source lang="bash">systemctl start push_secretary
systemctl start payloader
systemctl start apple_pusher@{1..6}
systemctl start google_pusher@{1..8}
systemctl start callbacker@{1..2}
systemctl start status_porter@{1..2}
systemctl start housekeeper
</source>
== Check services status ==

<source lang="bash">systemctl status push_secretary
sleep 1
systemctl status payloader
sleep 1
systemctl status apple_pusher@{1..6}
sleep 1
systemctl status google_pusher@{1..8}
sleep 1
systemctl status callbacker@{1..2}
sleep 1
systemctl status status_porter@{1..2}
sleep 1
systemctl status housekeeper
</source>
While housekeeper had not started with error:<br />
'''&quot;ConnectionRefusedError: [Errno 111] Connection refused&quot;,'''<br />
other services had started, but in status of services contains errors, like:<br />
'''&quot;ERROR amqp:073 Couldn't connect to RabbitMQ server to consume ([Errno 111] Connection refused)&quot;'''<br />
add to /etc/systemd/system/*.service file, in [Unit] section, (where * is apple_pusher@, google_pusher@, callbacker, status_porter, housekeeper):

<source lang="bash">After=rabbitmq-server.service
</source>
While after request to localhost:80/8080 payloader/push_secretary get errors, you need to change current version uvloop to 0.8.1

<source lang="bash">pip uninstall uvloop
pip install uvloop==0.8.1
</source>
== Enable services ==
<source lang="bash">systemctl enable push_secretary
systemctl enable payloader
systemctl enable apple_pusher@{1..6}
systemctl enable google_pusher@{1..8}
systemctl enable callbacker@{1..2}
systemctl enable status_porter@{1..2}
systemctl enable housekeeper
</source>
At this step you may set up number of processes. For example, if you need just one of ''apple_pusher'' process, you need to correct ''systemctl enable'' command like this:
<source lang="bash">systemctl enable apple_pusher@1</source>
Ajusting quantity of ''push_secretary'' and ''payloader'' serveces is in the ''configuration/pushgate.conf'' file, described [[PayControl_Inform#Настройка|here]].

= Reinstall (update) services =
==Backup==
Backup all files, that was modified, or you want to save during update. In example it may be:
* configuration file ''configuration/pushgate.conf'';
* APNS certificates.
==Stop services==
<syntaxhighlight lang="bash">
systemctl stop push_secretary
systemctl stop payloader
systemctl stop apple_pusher@{1..6}
systemctl stop google_pusher@{1..8}
systemctl stop callbacker@{1..2}
systemctl stop status_porter@{1..2}
systemctl stop housekeeper
</syntaxhighlight>
==Change environment==
<syntaxhighlight lang="bash">
cd /var/app
source .env/bin/activate
</syntaxhighlight>
==Update files==
Next step is putting new files into current directory. There are two ways:
* Extract archives recieved from SafeTech.
* From Safe-Tech Repository (throught internal network only). Example:
<syntaxhighlight lang="bash">cd apple-pusher
git checkout .
git pull
cd ../callbacker
git checkout .
git pull
cd ../configuration
git checkout .
git pull
cd ../google-pusher
git checkout .
git pull
cd ../housekeeper
git checkout .
git pull
cd ../payloader
git checkout .
git pull
cd ../pushgate
git checkout .
git pull
cd ../push-secretary
git checkout .
git pull
cd ../status-porter
git checkout .
git pull
cd ../tasker
git checkout .
git pull
cd ../
</syntaxhighlight>
==Update components==
Update pip:
<syntaxhighlight lang="bash">
pip install --upgrade pip
</syntaxhighlight>
Update PCInform components:
<syntaxhighlight lang="bash">
pip install --upgrade -e pushgate
pip install --upgrade -e tasker
pip install --upgrade -e push-secretary
pip install --upgrade -e payloader
pip install --upgrade -e apple-pusher
pip install --upgrade -e google-pusher
pip install --upgrade -e callbacker
pip install --upgrade -e status-porter
pip install --upgrade -e housekeeper
</syntaxhighlight>
==Start services==
<syntaxhighlight lang="bash">
systemctl start push_secretary
sleep 3
systemctl status push_secretary
sleep 1
systemctl start payloader
sleep 3
systemctl status payloader
sleep 1
systemctl start apple_pusher@{1..6}
sleep 3
systemctl status apple_pusher@{1..6}
sleep 1
systemctl start google_pusher@{1..8}
sleep 3
systemctl status google_pusher@{1..8}
sleep 1
systemctl start callbacker@{1..2}
sleep 3
systemctl status callbacker@{1..2}
sleep 1
systemctl start status_porter@{1..2}
sleep 3
systemctl status status_porter@{1..2}
sleep 1
systemctl start housekeeper
sleep 3
systemctl status housekeeper
</syntaxhighlight>

= Customization =
== Optimum services count for 20 CPU ==
<source lang="bash">push_secretary workers count = 3
payloader workers count = 3
apple_pusher@{1..6}
google_pusher@{1..8}
status_porter@{1..2}
callbacker@{1..2}```
</source>
== Set up NGINX for SSL/TLS-Offload for payloader ==
Use Google, something like this [https://www.digitalocean.com/community/tutorials/how-to-set-up-nginx-load-balancing-with-ssl-termination https://www.digitalocean.com/community/tutorials/how-to-set-up-nginx-load-balancing-with-ssl-termination]
[[Категория:Документация]]
[[Категория:Серверная часть]]
[[Категория:PayControl Inform]]
[[Категория:Статьи на английском]]